Apple iPhone 4S Battery Replacement Instructions

The following guide may be used to replace Apple iPhone 4S Battery. Please see caution and care notes below before beginning. Please see complete model list below that these instructions are compatibile with.

1. Begin by turning off your iPhone.

2. Remove the two screws at the base of your iPhone.

3. Now remove the iPhone's back cover. To do this gently press the cover down and slide the cover upward to remove your iPhone's back cover.

4. Next remove the 2 screws securing the connector cover (and brass grounding plate).

5. Disconnect the battery. Gently loosen and pry out the original battery. The battery is held down by an adhesive. So gentle firmness will be required. Use of the plastic pry tool will also be essential in removing the battery.

6. Place a new iPhone 4S Battery from BatteryShip.com into your iPhone.

7. Position your new battery and attach the battery connector.

8. Secure the battery connector with the 2 screws (and brassgrounding plate) to hold it in place.

9. Replace the back cover and slide into placed closing into place.

12. Replace the 2 screws at the base of your iPhone.

13. Turn on your iPhone. Be sure to charge the iPhone for at least 2 hours before continuing

to use.

PLEASE NOTE: Patience and care|along with moderate technical and hand tool ability|are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions|you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages|problems|or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Instruction Model Compatible List:

616-0479, 616-0579, 616-0580, A1387, A1431, GB-S10-423282-0100, iPhone 4S, iPhone 4S 16GB, iPhone 4S 32GB, iPhone 4S 64GB, LIS1474APPC, MC918LL/A, MC919LL/A, MC920LL/A, MC921LL/A, MD269LL/A, MD276LL/A, MD277LL/A, MD277LL/A, MD278LL/A, MD279LL/A, MD280LL/A, MD281LL/A, MD377LL/A, MD378LL/A, MD379LL/A, MD380LL/A,  MD381LL/A, MD382LL/A

Apple iPhone 4 Battery Replacement Instructions

The following guide may be used to replace Apple iPhone 4 Battery. Please see caution and care notes below before beginning. Please see complete model list below that these instructions are compatibile with.

1. Begin by turning off your iPhone.

2. Remove the two screws at the base of your iPhone.

3. Now remove the iPhone's back cover. To do this gently press the cover down and slide the cover downward to remove your iPhone's back cover.

4. Next remove the 2 screws securing the connector cover.

5. Disconnect the battery. Gently loosen and pry out the original battery. The battery is held down by an adhesive. So gentle firmness will be required. Use of the plastic pry tool will also be essential in removing the battery.

6. Place a new iPhone 4 Battery from BatteryShip.com into your iPhone.

7. Position your new battery and attach the battery connector.

8. Secure the battery connector with the 2 screws to hold it in place.

9. Replace the back cover by sliding upward and closing into placve.

10. Replace the 2 screws at the base of your iPhone.

11. Turn on your iPhone. Be sure to charge the iPhone for at least 2 hours before continuing

to use.

PLEASE NOTE: Patience and care|along with moderate technical and hand tool ability|are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these  instructions|you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages|problems|or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Instruction Model Compatible List:

616-0512, 616-0520, 616-0521, A1332, GB-S10-423482-0100, iPhone 4 16GB, iPhone 4 32GB, iPhone 4G, iPhone 4G 16GB, iPhone 4G 32GB, iPhone MC608LL/A, iPhone MD440LL/A

Apple iPhone 5 Battery Replacement Instructions

The following guide may be used to replace Apple iPhone 5 Battery. Please see caution and care notes below before beginning. Please see complete model list below that these instructions are compatible with.

1. Begin by turning off your iPhone.

2. Remove the two screws at the base of your iPhone.

3. Next using the provided suction cup carefully remove the iPhone screen. Use enough force to remove the screen but BE CAREFUL as the screen is attached to cables on the inside.  Pull upward just enough to insert the shim tool. Then use the shim tool to remove the rest of the screen. Be careful to not pull the screen more than 1 inch apart because there is a ribbon cable connecting the connector to the screen. Opening the iPhone to far will result in damaging the cable.

4. Next remove the 2 screws securing the connector cover.

5. Disconnect the battery. Gently loosen and pry out the original battery. The battery is held down by an adhesive. So gentle firmness will be required. Use of the plastic pry tool will also be essential in removing the battery.

6. Place a new iPhone 5 Battery from BatteryShip.com into your iPhone.

7. Now we need to reverse our steps..

8. Position your new battery and attach the battery connector.

9. Replace the battery connector cover and the 2 screws to hold it in place.

10. Replace the screen "top first" and snap into place.

11. Replace the 2 screws at the base of your iPhone.

12. Turn on your iPhone. Be sure to charge the iPhone for at least 2 hours before continuing to use.

PLEASE NOTE: Patience and care|along with moderate technical and hand tool ability are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions|you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages|problems|or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Instruction Model Compatible List:616-0610, 616-0611, AAP353292PA, 616-0613, 616-0612, P11GM8-01-S01  Apple iPhone 5, MD645LL/A, MD644LL/A, iPhone 5 64GB, MD637LL/A, MD638LL/A, iPhone 5 32GB, MD636LL/A, MD635LL/A, iPhone 5 16GB, MD634LL/A, MD668LL/A, MD667LL/A, MD661LL/A, MD660LL/A, MD657LL/A, MD656LL/A, MD665LL/A, MD664LL/A, MD659LL/A, MD658LL/A, MD655LL/A, MD654LL/A

 

Apple iPhone 5S Battery Replacement Instructions

The following guide may be used to replace Apple iPhone 5S Battery. Please see caution and care notes below before beginning. Please see complete model list below that these instructions are compatible with.

1. Begin by turning off your iPhone.

2. Remove the two screws at the base of your iPhone.

3. Next using the provided suction cup carefully remove the iPhone screen. Use enough force to remove the screen but BE CAREFUL as the screen is attached to cables on the inside.  Pull upward just enough to insert the shim tool. Then use the shim tool to remove the rest of the screen. Be careful to not pull the screen more than 1 inch apart because there is a ribbon cable connecting the fingerprint connector to the screen. Opening the iPhone to far will result in damaging the cable.

5. Next dissconnect the ribbon cable connecting the fingerprint connector to the screen.

6. Next pull back the screen and remove the 4 screws securing the metal cover.

7. Carefully dislodge the screen connector tabs and set the screen aside.

8. Remove the 2 screws to the metal battery connector cover. 

9. Lift out the battery connector tab.

10. Gradually pry out the original battery. The battery is held down by an adhesive. So gentle firmness will be required. Use of the plastic pry tool will also be essential in removing the battery.

9. Place a new iPhone 5S Battery from BatteryShip.com into your iPhone.

10. Now we need to reverse our steps..

11. Position your new battery and attach the battery connector.

12. Replace the battery cover and the 2 screws to hold it in place.

13. Carefully reattach the screen and the 3 screen connector tabs.

14. Carefully replace the metal screen connector cover and secure it with the 4 screws.

15. Replace the screen ribbon cable and cover.

16. Replace the screen "top first" and snap into place.

17. Replace the 2 screws at the base of your iPhone.

18. Turn on your iPhone. Be sure to charge the iPhone for at least 2 hours before continuing

to use.

PLEASE NOTE: Patience and care|along with moderate technical and hand tool ability|are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions|you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages|problems|or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Instruction Model Compatible List:

616-0652, 616-0720, 616-0728, 616-0722  Apple iPhone 5s, A1234, A1528, A1457, A1533, ME342LL/A, ME341LL/A, ME345LL/A, ME344LL/A, ME347LL/A, ME348LL/A, ME349LL/A, A1529, A1518, A1516, A1518, A1516, A1530

Apple iPhone 3G Battery Replacement Instructions

The following guide may be used to replace Apple iPhone 3G Battery. Please see caution and care notes below before beginning. Please see complete model list below.

1. Begin by turning off your iPhone.

2. Next remove your SIM card.

3. Remove the two screws at the base of your iPhone.

4. Next using the provided suction cup carefully remove the iPhone screen. Use enough force to remove the screen but BE CAREFUL as the screen is attached to cables on the inside.  The screen is designed to pull apart with the suction cup but then once apart you will need to remove the cables which is the next step.

5. To seperate tge screen carefully detach the connectors in order 1-6.

6. Next remove the 7 screws securing the circuit board. The 5th screw is under tape. Gently peel back the tape to reveal the screw and remove.

7. Carefully lift the circuit board. Detach the camera connector from the circuit board and remove. You should now see the battery.

8. Remove the battery. The battery is held down by an adhesive. So gentle firmness will be required. Use of the plastic pry tool will also be essential in removing the battery.

9. Place a new iPhone 3G Battery from BatteryShip.com into your iPhone.

10. Now we need to reverse our steps..

11. Reattach the camera connector to the circuit board.

12. Replace the circuit board. Be careful to not detach the camera connector.

13. Reattach connectors 4-6.

14. Replace all 7 screws to secure the circuit board.

15. Reattach connectors 1-3. This requires the attaching of the screens ribbon cable or  connector number 3. Be sure to attach the final 2 connectors.

16. Carefully close and snap the screen.

17. Replace the 2 screws at the base of your iPhone.

18. Replace your SIM card.

19. Turn on your iPhone. Be sure to charge the iPhone for at least 2 hours before continuing to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

 

Instruction Compatible Model List:

HLP088-H1942, 616-0372, 616-0428, Apple iPhone 3G 8GB, iPhone 3G 16GB
616-0431, 616-0432, 616-0434, GB-S10-374270-0200, GB-S10-374270-0100, 616-0435  Apple iPhone 3G S 16GB, iPhone 3G S 32GB