Author: BatteryEducation

Garmin Nuvi 1400 Battery Installation Instructions

The following Garmin Nuvi 1400 Battery Replacement Instruction guide can be used for the:

1. To begin use the pry tool to remove the Nuvi's primary faceplate. Slide the prytool in the groove around the outside edges of the faceplate (this is the black cover that goes around the face of the nuvi to protect the screen if you lay the nuvi face down). When done you will see 4 screws (1 on each the 4 corners).

2. Remove the four screws using the torx provided in your Kit from BatteryShip.com.

3. Once the screw are removed, remove the Garmin's secondary faceplate by running the pry tool around the edge of the Garmin. This will separate the 2 halves.

4. Next slowly and carefully pull your Garmin screen up and forward. Do not completely separate the 2 halves as a ribbon cable is attached on and connects both sides (this is what powers and controls you screen).

4. Next you will need to lift up the circuit board. To do this you have to remove the 2 screws that hold the circuit board in place. Use the tools that came in your kit to remove the 2 screws securing the circuit board.

5. Once the circuit board screws are removed carefully lift the circuit board so that you can access the battery connector. Hint: as you remove the screws of the circuit board you will see the batter. Garmin designed the circuit board so that the battery connector would have to be connected on the bottom of the board. So once you lift the board up a little you will be able to grab the battery cable and disconnect the battery from the circuit board.

6. Next pry the original battery up.

7. Replace the original Garmin Nuvi 1400 Battery with one from BatteryShip.com and connect
the new battery back to the circuit board.

8. Replace the circuit board to its original position and screw the circuit board back in place.

9. Return the screen back to its original position and attach the secondary faceplate to the screen.

10. Replace the 4 screws around the 4 corners of the Garmin.

11. Replace the primary faceplate by securely snapping in the plate all the way around the Nuvi.

12. Charge your new Garmin Nuvi 1400 Battery for 4 hours and then turn on.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are
required for the successful replacement of a battery. Excessive force may result in damage
to your device. The instructions above come with no warranty or guarantee. By utilizing
these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless
and unaccountable for any and all damages, problems, or personal injuries that may or may
not arise by your use of these instructions. Replacing your battery may void any warranty
you have on your device. Please read all instructions BEFORE replacing the battery.

Magellan Maestro 4220 Battery Installation Instructions

The following Magellan Maestro 4220 Battery Replacement Instruction guide can be used for the:

Magellan Maestro 4220

1. To begin turn your Magellan Maestro 4220 over and remove the 4 rubber caps to reveal the 4 four screws.

2. Remove the four screws on the back.

3. Using the pry tool carefully pry apart the front of the device.

4. Disconnect the ribbon cable by prying up the plastic retainer.

5. Remove the 2 screws securing the circuit board.

6.Pry off the circuit board gently.

7. Pry the original battery up and disconnect the original battery.

8. Replace the original Magellan Maestro 4220 Battery with one from BatteryShip.com and connect the new battery.

9. Replace the circuit board and screw the circuit board back in place.

10. Connect the front cover to the circuit board.

11. Close the case and turn the Magellan Maestro 4220 over on its face.

12. Replace the 4 screws and the rubber caps.

13. Charge your new Magellan Maestro 4220 Battery for 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Magellan Maestro 4210 Battery Installation Instructions

The following Magellan Maestro 4210 Battery Replacement Instruction guide can be used for the:

Magellan Maestro 4210

1. To begin turn your Magellan Maestro 4210 over and remove the 4 rubber caps to reveal the 4 four screws.

2. Remove the four screws on the back.

3. Using the pry tool carefully pry apart the front of the device.

4. Disconnect the ribbon cable by prying up the plastic retainer.

5. Remove the 2 screws securing the circuit board.

6.Pry off the circuit board gently.

7. Pry the original battery up and disconnect the original battery.

8. Replace the original Magellan Maestro 4210 Battery with one from BatteryShip.com and connect the new battery.

9. Replace the circuit board and screw the circuit board back in place.

10. Connect the front cover to the circuit board.

11. Close the case and turn the Magellan Maestro 4210 over on its face.

12. Replace the 4 screws and the rubber caps.

13. Charge your new Magellan Maestro 4210 Battery for 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Magellan Maestro 4200 Battery Installation Instructions

The following Magellan Maestro 4200 Battery Replacement Instruction guide can be used for the:

Magellan Maestro 4200

1. To begin turn your Magellan Maestro 4200 over and remove the 4 rubber caps to reveal the 4 four screws.

2. Remove the four screws on the back.

3. Using the pry tool carefully pry apart the front of the device.

4. Disconnect the ribbon cable by prying up the plastic retainer.

5. Remove the 2 screws securing the circuit board.

6.Pry off the circuit board gently.

7. Pry the original battery up and disconnect the original battery.

8. Replace the original Magellan Maestro 4200 Battery with one from BatteryShip.com and connect the new battery.

9. Replace the circuit board and screw the circuit board back in place.

10. Connect the front cover to the circuit board.

11. Close the case and turn the Magellan Maestro 4200 over on its face.

12. Replace the 4 screws and the rubber caps.

13. Charge your new Magellan Maestro 4200 Battery for 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 700 Battery Installation Instructions

The following Garmin Nuvi 700 Battery Replacement Instruction guide can be used for the following models:

Garmin Nuvi 700 Battery

1. Begin by turning your nuvi 700 face down.

2. On the back near the bottom there will be 2 small screws. Remove those screws with the T4 screw driver provided.

3. Next using the pry tool provided separate the housing case being sure to separate all around the Garmin.

4. Lift up the front portion of the nuvi being careful not to fully separate the two parts as the battery connector and the speaker connector will be attached and connected. Lift just enough to see the battery and the connectors.

(At this point you have 2 options at this point – either disconnect both the speaker wire connector and the battery connector to full separate both halves or simply disconnect the battery cable. You can do whatever is easier for you.)

5. Now disconnect the old battery and remove. There may be some adhesive glue holding down the old battery so you may need to gently pry the old battery up.

6. Insert the new Garmin Nuvi 700 battery. There is only one way to put the new battery in – the red wire will face the top. Now reconnect the battery (and if you disconnected the speaker then reconnect the speaker cable).

7. Now close the housing being careful to not pinch the wires. Click the housing together.

8. Now screw the 2 screws back on place using the T4.

9. Charge your new battery for 4 hours and then turn on to use your Garmin Nuvi 700.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Amazon Kindle 3 Battery Replacement Instructions

The following battery replacement instruction guide can be used for the following models:

Amazon Kindle 3 Battery

1. Begin by turning your Amazon Kindle 3 face down. Placing your Kindle 3 on a soft cloth will help prevent the screen from being scratched.

2. Using your pry tool pry off back cover by detatching the clips that holds the cover on. You will need to slide the pry tool around the entire back cover. After the clips have been detached slide the cover downward and the cover will then come off.

3. Once the back cover is off you will see the inside of the Kindle and the battery.

4. Next remove the 2 screws securing the battery.

5. Remove the original battery.

6. Replace the original battery with the your new Amazon Kindle 3 Battery Replacement from BatteryShip.com

7. Replace the two screws to secure the battery.

8. Replace the cover and snap into place. You will need to be sure to snap the cover in completely.

9. Charge your new Kindle 3 Battery for at least 4 hours. Then turn on and use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Amazon Kindle 2 Battery Replacement Instructions

The following battery replacement instruction guide can be used for the following models:

Amazon Kindle 2 Battery

1. Begin by turning your Amazon Kindle 2 face down. Placing your Kindle 2 on a soft cloth will help prevent the screen from being scratched.

2. Using your pry tool pry off the upper grey portion of the Kindle to reveal 2 small screws.

3. Once the upper portion is removed you will see two small screws on either side of the Kindle at the base of the cover. Please remove the screws.

4. Next use the pry tool to press down on the two plastic clips to release the cover. Once the clips are pressed down, lift off the cover to reveal the battery.

5. Remove the two screws securing the battery. Then using the prytool lift up the original battery.

6. Replace the original battery with the your new Amazon Kindle 2 Battery Replacement from BatteryShip.com

7. Replace the two screws to secure the battery.

8. Replace the cover and snap into place.

9. Return the two screws to hold the cover into place.

10. Return the upper grey portion of the Kindle.

11. Charge your new Kindle 2 Battery for at least 4 hours. Then turn on and use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Amazon Kindle 1 Battery Replacement Instructions

The following battery replacement instruction guide can be used for the following models:

Amazon Kindle 1 Battery

1. Begin by turning your Amazon Kindle 1 face down.

2. Slide the grey back cover off of the Kindle.

3. Gently lift the original battery out of the battery compartment and disconnect.

4. Place in the new Amazon Kindle 1 battery replacement and connect it to the battery connector.

5. Replace the grey back cover.

6. Charge your Amazon Kindle 1 for 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Edge 605 Battery Replacement Instructions

The following Garmin Edge 605 Battery Replacement Instruction guide can be used for the following models:

Garmin Edge 605 Battery and replacement kit

1. Begin by turning your Garmin face down and then remove the 6 screws on the back of your Garmin Edge 605.

2. Next using the pry tool carefully pry apart your Garmin casing using the shim/pry tool provided (this may take running the pry tool around the seams a couple of times but it will separate). Or you can grab both halves and carefully pull open. Do not pull completey apart as the battery cable is connected to circuit board.

3. Again as you open the 2 halves do not completely pull them apart as there will be connectors you will need to detach. One of the connectors is the battery connector. Remove the connector attached to the circuit board first. Then revovbe the battery connector. Once these connectors are detached you will be able to separate the 2 halves completely.

4. Now using the pry tool again remove the original battery (it is held down by an adhesive so pry with a gentle firmness)

5. Next place a piece of double sided tape in the battery compartment (this will hold down the battery so it does not move around on you)

6. Next place on the tape the new Garmin Edge 605 battery replacement.

7. Reconnect the connectors from step 3.

8. Next place the 2 sides together and gently snap the device shut (snap all the way around).

9. Next Replace the 6 screws you took out.

10. Next charge your Garmin Edge 705 for 4 hours.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Sony PRS-600 Battery Replacement Instructions

The following Sony PRS-600 Battery Replacement Instruction guide can be used for the following models:

Sony PRS-600 Battery

1. Begin by laying your Sony face down so that the backside is facing you.

2. Next remove the two screws located on the back of your device.

3. Next detach the clip holding the back cover. Use your pry tool to help detach the clip. The clip is the the long back piece that runs the length of your Sony and is the piece held in by the 2 screws your just removed.

4. Next remove the back cover to reveal the inside of your Sony and the battery.

5. Remove the original battery and disconnect the battery cable from the circuit board. . The pry tool will help you lift the old battery out.

6. Replace and connect the new Sony PRS-600 Battery and place into the battery compartment (where you took the original out of).

7. Now let's reverse our steps. Replace the back cover so that it snaps in to the long back clip.

8. Replace the 2 screws on the clip.

9. Charge your battery for a four hours. Then turn on your Sony.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.