SkyGolf SkyCaddie SGX Battery

The following are the SkyGolf SkyCaddie SGX and SGXw Batteries Replacement Instruction guide.

1. Begin by laying your Skycaddie SGX face down.

2. Loosen the three battery cover screws and gently pull up on the cover using our included pry tool – note that the flat head screw driver will open the screws.

Sgx full

3. Remove the old battery.

4. Replace the old battery by inserting a brand new SkyGolf Skycaddie SGX Battery from BatteryShip.com. The battery will be inserted at an angle so be sure to align the two pegs on each side of the battery with the channels on the SkyCaddie. Slide the battery down to snap it into place.

5. Replace the battery cover.

6. Charge your new battery for four hours. Then turn on your SGX.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.