TomTom XXL 550TM Battery Installation Instructions

The following instruction guide may be used to replace the TomTom XXL 550TM Battery.

1.  Begin by lifting the ends of the label at the base of your TomTom to reveal the screws underneath.

2. Remove the screws.

3. Next using the pry tool carefully slide the pry tool around the TomTom to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

3. Next remove the screws securing the circuit board,

4. Next carefully lift the circuit board to access the battery.

5. Now pry up the original battery and disconnect the original battery.

6. Replace the battery with a new TomTom XXL 550TM Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place. Connect the new battery.

Now we need to reverse our steps…

7. Re-seat the circuit board and secure the board with the screws. 

8. Carefully snap shut your TomTom.

9. Replace the screws to the base of the TomTom and reapply the

10. Charge your TomTom XXL 550TM for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

TomTom XXL 550M Battery Installation Instructions

The following instruction guide may be used to replace the TomTom XXL 550M Battery.

1.  Begin by lifting the ends of the label at the base of your TomTom to reveal the screws underneath.

2. Remove the screws.

3. Next using the pry tool carefully slide the pry tool around the TomTom to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

3. Next remove the screws securing the circuit board,

4. Next carefully lift the circuit board to access the battery.

5. Now pry up the original battery and disconnect the original battery.

6. Replace the battery with a new TomTom XXL 550M Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place. Connect the new battery.

Now we need to reverse our steps…

7. Re-seat the circuit board and secure the board with the screws. 

8. Carefully snap shut your TomTom.

9. Replace the screws to the base of the TomTom and reapply the

10. Charge your TomTom XXL 550M for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

TomTom XXL 550T Battery Installation Instructions

The following instruction guide may be used to replace the TomTom XXL 550T Battery.

1.  Begin by lifting the ends of the label at the base of your TomTom to reveal the screws underneath.

2. Remove the screws.

3. Next using the pry tool carefully slide the pry tool around the TomTom to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

3. Next remove the screws securing the circuit board,

4. Next carefully lift the circuit board to access the battery.

5. Now pry up the original battery and disconnect the original battery.

6. Replace the battery with a new TomTom XXL 550T Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place. Connect the new battery.

Now we need to reverse our steps…

7. Re-seat the circuit board and secure the board with the screws. 

8. Carefully snap shut your TomTom.

9. Replace the screws to the base of the TomTom and reapply the

10. Charge your TomTom XXL 550T for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

TomTom XXL 550 Battery Installation Instructions

The following instruction guide may be used to replace the TomTom XXL 550 Battery.

1.  Begin by lifting the ends of the label at the base of your TomTom to reveal the screws underneath.

2. Remove the screws.

3. Next using the pry tool carefully slide the pry tool around the TomTom to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

3. Next remove the screws securing the circuit board,

4. Next carefully lift the circuit board to access the battery.

5. Now pry up the original battery and disconnect the original battery.

6. Replace the battery with a new TomTom XXL 550 Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place. Connect the new battery.

Now we need to reverse our steps…

7. Re-seat the circuit board and secure the board with the screws. 

8. Carefully snap shut your TomTom.

9. Replace the screws to the base of the TomTom and reapply the

10. Charge your TomTom XXL 550 for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

TomTom Go 750 Live Battery Installation Instructions

The following instruction guide may be used to replace the TomTom Go 750 Live Battery.

1.  Begin by removing the two plastic covers to reveal 4 screws. They are the black covers on the edges of the TomTom's faceplate.

2. Remove the four screws.

3. Next using the pry tool carefully slide the pry tool around the TomTom to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

4. The battery is positioned under the circuit board. To access the circuit board first remove the tape securing the connector.

5. Then disconnect both cables.

6. Then remove the 5 screws securing the circuit board.

7. Next carefully lift the circuit board to reveal the battery.

8. Now pry up the original battery. Replace the battery with a new TomTom Go 750 Live Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place.

Now we need to reverse our steps…

9. Re-seat the circuit board and secure the board with the 5 screws.

10. Connect both cables removed in step 4.

11. Reapply the tape to hold the cable down.

12. Carefully snap shut your TomTom.

13. Secure the two halves by screwing the four screws back into the TomTom.

14. Reseat the plastic covers and gently snap shut.

15. Charge your TomTom Go 750 Live for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

TomTom Go 750 Battery Installation Instructions

The following instruction guide may be used to replace the TomTom Go 750 Battery.

1.  Begin by removing the two plastic covers to reveal 4 screws. They are the black covers on the edges of the TomTom's faceplate.

2. Remove the four screws.

3. Next using the pry tool carefully slide the pry tool around the TomTom to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

4. The battery is positioned under the circuit board. To access the circuit board first remove the tape securing the connector.

5. Then disconnect both cables.

6. Then remove the 5 screws securing the circuit board.

7. Next carefully lift the circuit board to reveal the battery.

8. Now pry up the original battery. Replace the battery with a new TomTom Go 750 Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place.

Now we need to reverse our steps…

9. Re-seat the circuit board and secure the board with the 5 screws.

10. Connect both cables removed in step 4.

11. Reapply the tape to hold the cable down.

12. Carefully snap shut your TomTom.

13. Secure the two halves by screwing the four screws back into the TomTom.

14. Reseat the plastic covers and gently snap shut.

15. Charge your TomTom Go 750 for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions.  Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

TomTom Go 740 Live Battery Installation Instructions

The following instruction guide may be used to replace the TomTom Go 740 Live Battery.

1.  Begin by removing the two plastic covers to reveal 4 screws. They are the black covers on the edges of the TomTom's faceplate.

2. Remove the four screws.

3. Next using the pry tool carefully slide the pry tool around the TomTom to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

4. The battery is positioned under the circuit board. To access the circuit board first remove the tape securing the connector.

5. Then disconnect both cables.

6. Then remove the 5 screws securing the circuit board.

7. Next carefully lift the circuit board to reveal the battery.

8. Now pry up the original battery. Replace the battery with a new TomTom Go 740 Live Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place.

Now we need to reverse our steps…

9. Re-seat the circuit board and secure the board with the 5 screws.

10. Connect both cables removed in step 4.

11. Reapply the tape to hold the cable down.

12. Carefully snap shut your TomTom.

13. Secure the two halves by screwing the four screws back into the TomTom.

14. Reseat the plastic covers and gently snap shut.

15. Charge your TomTom Go 740 Live for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

TomTom Go 740TM Battery Installation Instructions

The following instruction guide may be used to replace the TomTom Go 740TM Battery.

1.  Begin by removing the two plastic covers to reveal 4 screws. They are the black covers on the edges of the TomTom's faceplate.

2. Remove the four screws.

3. Next using the pry tool carefully slide the pry tool around the TomTom to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

4. The battery is positioned under the circuit board. To access the circuit board first remove the tape securing the connector.

5. Then disconnect both cables.

6. Then remove the 5 screws securing the circuit board.

7. Next carefully lift the circuit board to reveal the battery.

8. Now pry up the original battery. Replace the battery with a new TomTom Go 740TM Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place.

Now we need to reverse our steps…

9. Re-seat the circuit board and secure the board with the 5 screws.

10. Connect both cables removed in step 4.

11. Reapply the tape to hold the cable down.

12. Carefully snap shut your TomTom.

13. Secure the two halves by screwing the four screws back into the TomTom.

14. Reseat the plastic covers and gently snap shut.

15. Charge your TomTom Go 740TM for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Magellan RoadMate 1475T Battery Installation Instructions

The following instruction guide may be used to replace the Magellan RoadMate 1475T Battery.

1.  Begin by removing the four screws on the back of your Magellan. The four screws are hidden under 4 rubber caps. To remove the caps use the pry tool to carefully lift them. After they are removed then remove the screws.

2. Next using the pry tool carefully slide the pry tool around the Magellan to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

3. Next disconnect the original battery and pry up the original battery. Replace the battery with a new Magellan RoadMate 1475T Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place. Connect the new battery.

Now we need to reverse our steps…

4. Snap the two halves of the Magellan shut.

5. Replace the 4 screws removed in step 1 and then replace the rubber caps over each screw.

6. Charge your Magellan RoadMate 1475T for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Magellan RoadMate 1445T Battery Installation Instructions

The following instruction guide may be used to replace the Magellan RoadMate 1445T Battery.

1.  Begin by removing the four screws on the back of your Magellan. The four screws are hidden under 4 rubber caps. To remove the caps use the pry tool to carefully lift them. After they are removed then remove the screws.

2. Next using the pry tool carefully slide the pry tool around the Magellan to open the device. Be careful not separate completely the two halves as they are connected together by a cable.

3. Next disconnect the original battery and pry up the original battery. Replace the battery with a new Magellan RoadMate 1445T Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old. You may want add a small piece of double sided tape to help hold the new battery in place. Connect the new battery.

Now we need to reverse our steps…

4. Snap the two halves of the Magellan shut.

5. Replace the 4 screws removed in step 1 and then replace the rubber caps over each screw.

6. Charge your Magellan RoadMate 1445T for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.