Milwaukee 12V Battery Price

This chart shows that when you are comparing retailers to buy a Milwaukee 12V Battery you cannot just assume that the same battery is being sold at every retailer. Batteries that have the same part numbers will often times have different capacity levels and those differences reflect in the price. Follow the chart below to see the differences in price and capability with the "same battery" from one retailer to the next. Again this is comparing Milwaukee 12V Battery part number: 48-11-0140

Retailer

BatteryShip

Brand

Milwaukee

Part #

48-11-0140

Volts

12V

Capacity

2.0Ah

Chemistry

NICD

Price for 1

$48.95 ($24.48 per Ah)

Price for 2

$88.11 ($44.05 per Ah)

Tax

No (except for WY residents)

Free Shipping

Yes

Cell Grade

A

Charger

n/a

Charger Price

n/a

OEM/AfterMarket

AfterMarket

Cost Value Grade

Low Price Good Value

The Milwaukee 12V Battery capacity  – is measured in either Ah or mAh. The higher the capacity rating, the longer your battery can last between charges (this is runtime).  Battery capacity quantifies the total amount of energy stored within a battery. Generally, BatteryShip.com batteries have a mAh rating 30-100% higher than the batteries that are originally installed by the manufacturer of your device. Another way to consider a battery's capacity is by runtime (how long a battery will power a device before the battery is recharged). The higher the capacity the longer the runtime. The longer the runtime the longer you will be able to use your device without recharging the battery. More capacity equals more runtime. More runtime equals better value!

Milwaukee 7.2V Battery Price

This chart shows that when you are comparing retailers to buy a Milwaukee 7.2V Battery you cannot just assume that the same battery is being sold at every retailer. Batteries that have the same part numbers will often times have different capacity levels and those differences reflect in the price. Follow the chart below to see the differences in price and capability with the "same battery" from one retailer to the next. Again this is  comparing Milwaukee 7.2V Battery part number: 48-11-0130

Retailer

BatteryShip

Brand

Milwaukee

Part #

48-11-0130

Volts

7.2V

Capacity

2.0Ah

Chemistry

NICD

Price for 1

$51.95 ($25.98 per Ah)

Price for 2

$93.51 ($46.75 per Ah)

Tax

No (except for WY residents)

Free Shipping

Yes

Cell Grade

A

Charger

MIL-CH01

Charger Price

$48.95

OEM/AfterMarket

AfterMarket

Cost Value Grade

Low Price Best Value

Milwaukee 7.2V Battery capacity  – is measured in either Ah or mAh. The higher the capacity rating, the longer your battery can last between charges (this is runtime).  Battery capacity quantifies the total amount of energy stored within a battery. Generally, BatteryShip.com batteries have a mAh rating 30-100% higher than the batteries that are originally installed by the manufacturer of your device. Another way to consider a battery's capacity is by runtime (how long a battery will power a device before the battery is recharged). The higher the capacity the longer the runtime. The longer the runtime the longer you will be able to use your device without recharging the battery. More capacity equals more runtime. More runtime equals better value!

Milwaukee 2.4V Battery Price

This chart shows that when you are comparing retailers to buy a Milwaukee 2.4V Battery you cannot just assume that the same battery is being sold at every retailer. Batteries that have the same part numbers will often times have different capacity levels and those differences reflect in the price. Follow the chart below to see the differences in price and capability with the "same battery" from one retailer to the next. Again this is comparing Milwaukee 2.4V Battery part number: 48-11-0100

Retailer

BatteryShip

Brand

Milwaukee

Part #

48-11-0100

Volts

2.4V

Capacity

2.0Ah

Chemistry

NICD

Price for 1

$26.95 ($13.48 per Ah)

Price for 2

$48.51 ($24.25 per Ah)

Tax

No (except for WY residents)

Free Shipping

Yes

Cell Grade

A

Charger

n/a

Charger Price

n/a

OEM/AfterMarket

AfterMarket

Cost Value Grade

Low Price Best Value

Milwaukee 2.4V Battery capacity  – is measured in either Ah or mAh. The higher the capacity rating, the longer your battery can last between charges (this is runtime).  Battery capacity quantifies the total amount of energy stored within a battery. Generally, BatteryShip.com batteries have a mAh rating 30-100% higher than the batteries that are originally installed by the manufacturer of your device. Another way to consider a battery's capacity is by runtime (how long a battery will power a device before the battery is recharged). The higher the capacity the longer the runtime. The longer the runtime the longer you will be able to use your device without recharging the battery. More capacity equals more runtime. More runtime equals better value!

Milwaukee 9.6V Battery Price

This chart shows that when you are comparing retailers to buy a Milwaukee 9.6V Battery you cannot just assume that the same battery is being sold at every retailer. Batteries that have the same part numbers will often times have different capacity levels and those differences reflect in the price. Follow the chart below to see the differences in price and capability with the "same battery" from one retailer to the next. Again this is comparing Milwaukee 9.6V Battery part number: 48-11-0080

Retailer

BatteryShip

Brand

Milwaukee

Part #

48-11-0080

Volts

9.6V

Capacity

2.0Ah

Chemistry

NICD

Price for 1

$48.95 ($24.48 per Ah)

Price for 2

$88.11 ($44.05 per Ah)

Tax

No (except for WY residents)

Free Shipping

Yes

Cell Grade

A

Charger

MIL-CH01

Charger Price

$48.95

OEM/AfterMarket

AfterMarket

Cost Value Grade

Low Price Best Value

The Milwaukee 9.6V Battery Capacity  – is measured in either Ah or mAh. The higher the capacity rating, the longer your battery can last between charges (this is runtime).  Battery capacity quantifies the total amount of energy stored within a battery. Generally, BatteryShip.com batteries have a mAh rating 30-100% higher than the batteries that are originally installed by the manufacturer of your device. Another way to consider a battery's capacity is by runtime (how long a battery will power a device before the battery is recharged). The higher the capacity the longer the runtime. The longer the runtime the longer you will be able to use your device without recharging the battery. More capacity equals more runtime. More runtime equals better value!

Garmin Nuvi 40LM Battery Installation Instructions

The following instruction guide may be used to replace the Garmin Nuvi 40LM Battery.
 
1.  Begin by removing the four screws on the back of your Garmin.
 
2. Next using the pry tool carefully slide the pry tool around the Garmin to open the device. Be careful not separate completely the two halves as they are connected together by a gold ribbon cable.
 
3. Remove the 2 screws securing the circuit board.Gently lift the circuit board out of its compartment.

4. Next disconnect and pry up the original battery.

5. Place a strip of double sided tape into the battery compartment to secure the new battery.

6. Replace the battery with a new Garmin Nuvi 40LM Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old.
 
Now we need to reverse our steps…
 
7. Carefully repalce the circuit board and replace the 2 screws securing the circuit board.
 
8. Carefully snap together the Garmin.
 
9. Replace the 4 screws to secure your Garmin and charge your Garmin Nuvi 40LM for 4 hours then turn on to use.

 PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 40 Battery Installation Instructions

The following instruction guide may be used to replace the Garmin Nuvi 40 Battery.
 
1.  Begin by removing the four screws on the back of your Garmin.
 
2. Next using the pry tool carefully slide the pry tool around the Garmin to open the device. Be careful not separate completely the two halves as they are connected together by a gold ribbon cable.
 
3. Remove the 2 screws securing the circuit board.Gently lift the circuit board out of its compartment.

4. Next disconnect and pry up the original battery.

5. Place a strip of double sided tape into the battery compartment to secure the new battery.

6. Replace the battery with a new Garmin Nuvi 40 Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old.
 
Now we need to reverse our steps…
 
7. Carefully repalce the circuit board and replace the 2 screws securing the circuit board.
 
8. Carefully snap together the Garmin.
 
9. Replace the 4 screws to secure your Garmin and charge your Garmin Nuvi 40 for 4 hours then turn on to use.

 PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 30 Battery Installation Instructions

The following instruction guide may be used to replace the Garmin Nuvi 30 Battery.
 
1.  Begin by removing the four screws on the back of your Garmin.
 
2. Next using the pry tool carefully slide the pry tool around the Garmin to open the device. Be careful not separate completely the two halves as they are connected together by a gold ribbon cable.
 
3. Remove the 2 screws securing the circuit board.Gently lift the circuit board out of its compartment.

4. Next disconnect and pry up the original battery.

5. Place a strip of double sided tape into the battery compartment to secure the new battery.

6. Replace the battery with a new Garmin Nuvi 30 Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old.
 
Now we need to reverse our steps…
 
7. Carefully repalce the circuit board and replace the 2 screws securing the circuit board.
 
8. Carefully snap together the Garmin.
 
9. Replace the 4 screws to secure your Garmin and charge your Garmin Nuvi 30 for 4 hours then turn on to use.

 PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 50LM Battery Installation Instructions

The following instruction guide may be used to replace the Garmin Nuvi 50LM Battery.
 
1.  Begin by removing the four screws on the back of your Garmin.
 
2. Next using the pry tool carefully slide the pry tool around the Garmin to open the device. Be careful not separate completely the two halves as they are connected together by a gold ribbon cable.
 
3. Remove the 2 screws securing the circuit board.Gently lift the circuit board out of its compartment.

4. Next disconnect and pry up the original battery.

5. Place a strip of double sided tape into the battery compartment to secure the new battery.

6. Replace the battery with a new Garmin Nuvi 50LM Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old.
 
Now we need to reverse our steps…
 
7. Carefully repalce the circuit board and replace the 2 screws securing the circuit board.
 
8. Carefully snap together the Garmin.
 
9. Replace the 4 screws to secure your Garmin and charge your Garmin Nuvi 50LM for 4 hours then turn on to use.

PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Garmin Nuvi 50 Battery Installation Instructions

The following instruction guide may be used to replace the Garmin Nuvi 50 Battery.
 
1.  Begin by removing the four screws on the back of your Garmin.
 
2. Next using the pry tool carefully slide the pry tool around the Garmin to open the device. Be careful not separate completely the two halves as they are connected together by a gold ribbon cable.
 
3. Remove the 2 screws securing the circuit board.Gently lift the circuit board out of its compartment.

4. Next disconnect and pry up the original battery.

5. Place a strip of double sided tape into the battery compartment to secure the new battery.

6. Replace the battery with a new Garmin Nuvi 50 Battery Replacement from www.BatteryShip.com. Be sure to orient your new battery just like the old.
 
Now we need to reverse our steps…
 
7. Carefully repalce the circuit board and replace the 2 screws securing the circuit board.
 
8. Carefully snap together the Garmin.
 
9. Replace the 4 screws to secure your Garmin and charge your Garmin Nuvi 50 for 4 hours then turn on to use.

 PLEASE NOTE: Patience and care, along with moderate technical and hand tool ability, are required for the successful replacement of a battery. Excessive force may result in damage to your device. The instructions above come with no warranty or guarantee. By utilizing these instructions, you agree to hold Batteryship.com and BatteryEducation.com blameless and unaccountable for any and all damages, problems, or personal injuries that may or may not arise by your use of these instructions. Replacing your battery may void any warranty you have on your device. Please read all instructions BEFORE replacing the battery.

Hitachi 24V Battery Price

This chart shows that when you are comparing retailers to buy a Hitachi 24V Battery you cannot just assume that the same battery is being sold at every retailer. Batteries that have the same part numbers will often times have different capacity levels and those differences reflect in the price. Follow the chart below to see the differences in price and capability with the "same battery" from one retailer to the next. Again this is comparing Hitachi 24V Battery part number:

Retailer

BatteryShip

Brand

Hitachi

Part #

EB2420

Volts

24V

Capacity

2.0Ah

Chemistry

NICD

Price for 1

$73.95  ($36.98 per Ah)

Price for 2

$133.11 ($66.55 per Ah)

Tax

No (except for WY residents)

Free Shipping

Yes

Cell Grade

A

Charger

n/a

Charger Price

n/a

OEM/AfterMarket

AfterMarket

Cost Value Grade

Low Price Good Value

 The Hitachi 24V Battery capacity  – is measured in either Ah or mAh. The higher the capacity rating, the longer your battery can last between charges (this is runtime).  Battery capacity quantifies the total amount of energy stored within a battery. Generally, BatteryShip.com batteries have a mAh rating 30-100% higher than the batteries that are originally installed by the manufacturer of your device. Another way to consider a battery's capacity is by runtime (how long a battery will power a device before the battery is recharged). The higher the capacity the longer the runtime. The longer the runtime the longer you will be able to use your device without recharging the battery. More capacity equals more runtime. More runtime equals better value!